Supplement and replacement of bearing lubricant
|
| Time：2016.09.05 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Complementary interval time of A. grease
Due to the increasing of mechanical function, aging and pollution, the lubricating base in the bearing configuration will gradually lose its lubrication performance. As a result, it is necessary to supplement and renew the lubricating rank. The interval time of lubricant is different due to the formation, size and speed of the bearing. Figure 4-1 shows the approximate interval time of the grease according to the running time.
In addition, in Figure 4-1, when the bearing temperature of more than 70 degrees Celsius, bearing temperature rise 15 degrees Celsius, it is to use the lubricating grease to add time interval of half.
Double sealed bearing in manufacturing has been loaded into fat, "HRB" used in these products is standard grease, total operating temperature range and other performance suitable for specified occasions, and filling grease amount and size of the corresponding bearing, grease life can exceed the bearing life, except for special occasions, without grease.
Replacement cycle of B. lubricating oil
The replacement cycle of lubricating oil by using different conditions and the amount of oil, in general, the operating temperature is below 50 DEG C, the use of a good environment under less dust, replaced once a year, when the temperature reached 100 degrees, to 3 months or less to replace a.
|
|
