Xinkaite bearing periodic maintenance and inspections
|
| Time：2016.08.29 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
To make Xinkaite bearing full and proper performance of its long-term, we must effectively do regular maintenance (periodic inspection). Through appropriate periodic inspection, so that early detection of failure to prevent accidents in the first place, to improve productivity and economy is very important.
1, cleaning
The Xinkaite bearings removed for inspection, the first recorded appearance with good photography and other methods. In addition, to confirm the remaining amount of lubricant and lubricant sampling, and then cleaning Xinkaite bearings.
a, Xinkaite bearing the rough cleaning and fine cleaning sub-washing, and at the bottom of the container used in the metal grid.
b, coarse wash, brush with oil or grease and other clear adhesive material. Turning the Xinkaite bearing in oil, note the damage due to foreign bodies and other rolling surface.
c, sperm washing, in the oil slowly rotating Xinkaite bearings should be carefully carried.
Generally neutral cleaning agent used is water-free diesel fuel or kerosene, is sometimes necessary to use warm lye. No matter what kind of cleaning agent used, filter should always be kept clean.
After cleaning, immediately on the Xinkaite bearing anti-rust coating rust oil or grease.
2, inspection and judgment
In order to determine whether the removed bearing Xinkaite re-use, to focus on checking the accuracy of its size, rotation accuracy, internal clearance and with the surface, raceway, cage and ring.
On the inspection results, may be used Xinkaite bearing or bearings are proficient Xinkaite judgment.
Judgment criteria based on mechanical properties and the degree of importance and inspection cycles vary. If the following injury, Xinkaite bearings must not be reused and must be replaced.
1) fracture and defects Xinkaite bearing components.
2) rolling surface raceway was peeling.
|
|
