Acceptance methods for three types of bearings
|
| Time：2016.11.24 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Bearing production and sales need to test whether qualified, three types of bearings is no exception. Today is to introduce you to three kinds of bearing inspection methods.
1, through the analysis and calculation of these bearings to determine the use of various technical indicators and quality indicators of the host, or through technical means to improve the indicators.
2, in determining the design of the rotation accuracy can reach the specific targets, usually need to know the value of the specific bearing rotation accuracy.
3, in assembly technology, usually need to know the bearing shaft and hole and surface assembly axis azimuth error value and the maximum, using the corresponding maximum reverse installation method, in order to error can be offset to the maximum extent, to get more accurate Spindle.
4, the assembly plant is often dimensioned to measure the surface of the bearing device, the journal of the host and the actual size of the hole to adapt to the relative unity of a series of bearings is not too loose or too tight, in order to avoid deformation or surface runway creep phenomenon, To ensure the accuracy of the spindle and service life.
|
|
