Oil lubrication method for deep groove ball bearings
|
| Time：2016.11.22 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
In order to make good use of deep groove ball bearings, in the course of the use of oil lubrication will be used to prevent bearing friction, try to reduce its power, so as to improve the bearing speed and performance, our daily life bearings, There are five main oil lubrication, Xiao Bian in this summary for everyone to make, we want to help.
Vacuum impregnation
Vacuum impregnated, deep groove ball bearings into the pores containing porous cages, the force lubricant bearing, using the reservoir cage. This method is then used with a lubricated bearing, and its purpose is to prevent oil immersion, lubricating oil from the cage material. Typically, the grease is based in the cage to prevent incompatibility.
Grease packing
Deep Groove Ball Bearings Approx. 1/4 to 1/3 Ball Bearing The internal free volume of the bearing is one of the most common methods of grease lubrication. Grease quantity control of the use of special lubrication equipment. IBSCO is able to control the amount of lubricant to 0.5 mg if specified.
Grease plating
The grease composition consists of a mixture of fat and solvent in the desired consistency, and this mixed lubricating bearing is then evaporated in a moderate temperature solvent, leaving the grease film on the raceways, balls and cages. Grease is used for packing grease bearings with low torque values.
Oil electroplating
The oil electroplating consists of a mixture of oil and solvent in the desired amount of consistency, the lubricant in the solvent, the moderate temperature, the film leaving the raceway, the ball and the cage of oil. The oil plating for oil lubricated bearings has greatly reduced torque values and can be specified for extremely low torque applications.
Speed factor
The maximum grease available operating speed is dependent on the type of base oil. The speed factor is the function of the hole bearing (D) mm (mm) bearing rotational speed (N) at RPM.
|
|
