Several Methods of Antirust of Rolling Bearings
|
| Time：2016.11.18 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
There are two ways to choose the lubrication of rolling bearings: oil lubrication and grease lubrication. There are advantages and disadvantages of these two lubrication methods.
Under normal operating and environmental conditions, grease is possible to achieve "lifetime lubrication." If high load conditions (speed, temperature, load), it is necessary to regularly replace the grease. In order to change the grease, it is necessary to set the pipeline for supplying and removing the grease and collect the used grease collector. In the case of short cycle grease change, the necessary pumps and valves for grease injection should be provided.
Oil lubrication
When the rolling bearing near the mechanical parts have been used in oil lubrication or need to rely on oil cooling, the rolling bearings should be oil lubricated. When rolling bearings are under heavy loads or high rotational speeds, or external heat is introduced, there may be heat dissipation requirements.
The use of micro-lubrication, such as drip lubrication, oil mist lubrication or oil lubrication, can ensure that the loss of oil mixing and rolling bearing friction is very small.
When air is used as the carrier, the oil can be supplied directly and the air flow contributes to the sealing.
Rolling bearings are extremely high speed and the need to cool the suburbs of fruit, where a large number of lubricants can be sprayed directly to all the contact surface.
|
|
