40% of the bearing damage are related to poor lubrication
|
| Time：2016.10.25 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Non-standard bearing According to the analysis of roller bearing damage reasons, about 40% of the bearing damage are related to poor lubrication. If the oil is too small, the bearings will be scrapped in advance; if the oil change too much roller bearings will be in trouble or long-term damage to the power coil and coil, the problem has not been a good solution. Xinda roller mill proposed to set a time scale, can not be excessive lubrication, nor long-term non-lubricating.
Rolling sound and control methods Rolling sound is a cylindrical roller bearing in all occasions may occur in the ear-piercing metal friction sound, mostly in the grease lubrication of the larger model bearings, while the performance of the base oil lubrication Grease in the more prone to occur in the oil lubrication is almost non-standard bearings
INA bearing lubrication on the operation and life of a very important impact, here you are briefly introduced to the general principles of choice of grease. Grease from the base oil, thickeners and additives made of different types and the same type of different grades of grease performance vary greatly, allowing the rotation limit is different, be sure to pay attention to the choice.
|
|
