Causes of Non - standard Bearing Damage and How to Avoid
|
| Time：2016.10.22 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Generally speaking, as long as the non-standard bearings in a good working environment, the correct use of words is not part of the non-standard bearing as damaged. However, this is a precision part of the non-standard bearings in the end why it will be damaged?
Engineers analysis, many non-standard bearing damage because more than non-standard bearing can bear the load or not a good seal, too tight with the resulting non-standard bearing clearance is too small and so on. And different reasons will lead to different non-standard bearing damage to the form or leave marks of different damage. And we also found in many cases, 1/3 of the non-standard bearings because of fatigue damage, the other 1/3 because of poor lubrication, and 1/3 because the working environment is not clean, into the dirt or device Incorrect.
In order to minimize non-standard bearing damage, we usually pay attention to maintaining non-standard bearings and the working environment clean, do not let dust and other dirt into the non-standard bearings. Second, the installation should be careful not to impose too strong pressure.
|
|
